EU Empty Space Checker (PPWR 50% Limit)
Check whether a shipping box would meet the EU's 50% empty space limit for e-commerce, transport and grouped packaging.
Under Article 24 of the EU Packaging and Packaging Waste Regulation (PPWR), whoever fills e-commerce, transport or grouped packaging must keep the empty space ratio at 50% or less. Empty space is the outer box's volume minus the sales packaging inside it, and void fill counts as empty space. The limit applies from 1 January 2030, or later if the Commission's implementing rules push it back.
Outer box (inside dimensions)
What's inside (each product in its own sales packaging)
Box 17,500 cm³ · contents 5,400 cm³ · empty 12,100 cm³
To get to 50%, the box would need to be no bigger than about 10,800 cm³, roughly 38% smaller.
An estimate from simple box dimensions, not legal advice. The Commission is due to set the official calculation method by 12 February 2028.
How the empty space ratio is calculated
Article 24(3) of the PPWR defines both terms:
- Empty space = the volume of the outer packaging minus the volume of the sales packaging inside it.
- Empty space ratio = empty space ÷ the volume of the outer packaging.
Example: a 35 × 25 × 20 cm box holds 17,500 cm³. Inside are one 20 × 15 × 10 cm product box (3,000 cm³) and two 15 × 10 × 8 cm boxes (2,400 cm³), 5,400 cm³ in all. Empty space is 12,100 cm³, a ratio of 69%: well over the limit. A 30 × 20 × 18 cm box (10,800 cm³) would bring it to exactly 50%, if the items can be arranged to fit.
Why multi-item orders are the hard part
A single product in a close-fitting box usually passes easily. Multi-item orders are where boxes go over: the packer has to fit several shapes together, isn't sure they'll close, and reaches for a bigger box plus void fill. Meeting 50% on every order means working out the smallest box that genuinely fits each mix, before tape touches the box. That is what cartonization software does, and TCS-i reports include an EU empty space check on the orders you actually pack.
Frequently asked questions
What is the PPWR empty space limit?
Article 24 of the EU Packaging and Packaging Waste Regulation (Regulation (EU) 2025/40) says economic operators who fill grouped, transport or e-commerce packaging must ensure the empty space ratio is no more than 50%.
When does the 50% limit apply?
The PPWR as a whole has applied since 12 August 2026. The 50% empty space limit applies from 1 January 2030, or later if the timetable for the Commission's implementing acts pushes it back. The Commission is due to set the detailed calculation method by 12 February 2028.
Does void fill count as empty space?
Yes. Paper, air pillows, foam and other filling material count as empty space, so a box stuffed with void fill can still fail the limit.
Who is responsible: the brand or the 3PL?
The duty sits with the economic operator who fills the packaging. For outsourced e-commerce fulfilment, that is usually the 3PL that packs the order, which is why the box choice at the pack station matters.
Is this checker an official compliance test?
No. It estimates the ratio from simple box dimensions so you can spot problem boxes early. The official method is still to be set by the Commission, and you should take legal advice on your own obligations.
Related
- What is the empty space ratio?
- What is void fill?
- DIM weight calculator
- Box Suite Optimizer: find the box sizes that fit your real orders
See your own numbers
Run the free packaging audit on your WMS exports (no account, about three minutes), or book a demo to see TCS-i on a pack-station screen.
